Function Menus; Printer Function Priorities; Menu Flow Summaries - Canon W7200 User Manual

Function Menus

This printer is provided with many built-in functions that can be set with the
operation panel. The menus allow you to make system and option settings,
clean the printhead, print test prints, and display information about the
printer settings.

Printer Function Priorities

If the setting is different for the same item in both the operation panel and the
printer driver, the printer driver setting has priority over the operation panel
setting.

Menu Flow Summaries

The printer operation panel menus are summarized in the flowchart below.
Use the arrow buttons to display the items on the menus.
Enter
TMain Menu
MAIN MENU
*1
Force Cutting
Head Cleaning
Head Cleaning B
Head Cleaning A
Buzzer
Cutter
or Press to move to the previous or next item on the same level.
Press to move to the next level below.
Press to return to the previous level above.
Press to execute functions.
*4 Roll Media Type
*3
Cut Sheet Type
*2,3
Take-up Reel
Auto Feed
Nozzle Check
Status Print
Adjust Printer
Replace P.head
EOP Timer
Sleep Timer
Print Pattern B
Print Pattern A
Auto Print
Test Print
*5
System Setup
Auto Cut
Rep. Ink Tank
Interface
RAM
Version
Ink
CutDustReduct.
*6
IP Setting
Stand
Move Printer
Subnet Mask
IP Address
*1 Displayed only when "Roll Media" selected as the Media Source
and "Cutter" is enabled.
*2 Displayed only when "Enable" is selected for "Take-up Reel".
*3 W7200 only.
*4 Displayed only when "Cut Sheet" is selected as the Media Source.
*5 Displayed only when "Roll Media" is selected as the Media Source.
*6 W7250 only.
Information
Error
MAC Address
Ext. Interface
Language
Ink Check Off
Regis. Settings
Default G/W
Function Menus
5-7