Canon W7200 User Manual page 128

Canon user's guide large format printer w7200, w7250
Hide thumbs Also See for W7200:
Table of Contents

Advertisement

Problem 5: Printer is still warming up.
Solution:
Cannot Install Windows Printer Driver
Problem 1: Incorrect installer CD-ROM mounted.
Solution:
Problem 2: Provided User Software CD-ROM is damaged.
Solution:
Problem 3: Windows operating system is unstable.
Solution:
Problem 4: Installation does not complete successfully.
Solution:
Cannot Install Macintosh Printer Driver
Problem 1: Incorrect installer CD-ROM mounted.
Solution:
Problem 2: Provided User Software CD-ROM is damaged.
Solution:
System Does Not Recognize the Printer
Problem 1: Interface cable is disconnected.
Solution:
7-4
Troubleshooting
Immediately after the printer is switched on, it cannot print because it
needs a several seconds to warm up. After switching on the printer, you
must wait for the Online lamp to light and remain on.
Mount the User Software CD-ROM provided with the printer.
Call for service and request a new installer CD-ROM.
If Windows displays a system error message such as "General Protection
Fault" or "Illegal Operation", the computer system has become unstable.
Confirm the problem with the system and try to install again.
Delete the Printer icon then try to install again. (Æ Setup Guide)
Mount the User Software CD-ROM provided with the printer.
Call for service and request a new installer CD-ROM.
If the printer is connected via the USB or IEEE 1394 port, check the cable
connections at the printer and the computer. (Æ Setup Guide)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

W7250

Table of Contents