Switching the Printer Off
Important
1
2
1-10
Before Using the Printer
When you are finished using the printer, follow this procedure to switch the
printer off.
z To prevent damaging the printer or losing valuable data, never switch it off or
disconnect the power cord while the printer is operating.
z If the roll media is not to be used for a week or so, open the roll media tray and take
up the roll media. Leaving the roll media at the standby position for a week or
longer could cause the media to deteriorate.
Check the display to make sure that a print job is not in progress.
Paper Source
If you see an error message displayed, follow the procedure to correct the
problem, and make sure the print job has completed. If a print job is in
progress, wait for the print job to complete before switching off the printer.
Press and hold down the Power button for 3 seconds then release it.
Paper Source
"Please wait .." is displayed for a few seconds, then the printer goes off.
Data
Message
Roll Media
Cut Sheet
nline
Cancel
nter
Data
Message
Roll Media
Cut Sheet
Cancel
nter
Power
Online
Power
Online