Canon W7200 User Manual page 115

6
With the black sponge surface on the rail, place the rail cleaner on the
right side of the carriage rail, then move the rail cleaner all the way to
the left end of the carriage rail.
7
Close the upper cover.
8
Plug the power cord into the power source.
Important
z When you are finished using the rail cleaner, wash out the white sponge, re-install
in the rail cleaner, then store the rail cleaner in its protective case. If the printer is
installed on the stand, place the rail cleaner in the storage compartment in the leg
cover of the stand.
6-17
Cleaning the Printer