Loading Roll Media; Selecting The Media Source - Canon W7200 User Manual

Loading Roll Media

This is the general procedure for loading a paper cassette.
•
•
•
•
•
•
Important
z Make sure that the printer is switched on when you load roll media in the printer. If
the Roll Media Type selection does not match the type of roll media loaded in the
printer, this could cause poor print quality.
z Store unused roll media and other media in the original package. Store the package
in a cool, dry location that is not exposed to direct sunlight.
z To prevent jams, never open the roll media tray during printing.
z If you switch the printer off with the roll media set, do not pull out the roll media
tray. If you must open the roll media tray, open the upper cover, raise the media
release lever, then open the roll media tray.

Selecting the Media Source

When printing on roll media, with the operation panel select roll media as
the media source.
1
Press the Online button to display "Offline".
Remove all printed roll media or cut sheets from the tray.
On the operation panel, select the roll media source. (Æ P.2-7)
Load the roll media in the roll media tray. (Æ P.2-8)
On the operation panel, select the Roll Media Type. (Æ P.2-15)
Adjust the amount of media feed. (Æ P.7-36)
Start the print job on the computer. (Æ P.3-2, P.4-2)
Paper Source
Roll Media
Cut Sheet
Cancel
Data Message
Power
nter Online
2-7
Loading Roll Media