7. MAINTENANCE AND CLEANING ......................17 Basic information ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������17 Empty the ash drawer �������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������17 Checking the door contact �������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������17 Cleaning the door glass ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������17 Checking door seal ��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������17 Cleaning of painted surfaces �������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������17 Cleaning the flame temperature sensor ����������������������������������������������������������������������������������������������������������������������������������������������������������17 Combustion air - air intake �������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������17 Cleaning the flue gas channels ��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������17 8.
Spare part overview article number Nr. Art.Nr. Description Nr. Art.Nr. Description Z20556 Flue pipe connection black D150 N102434 Grub screw Z21690 Blind cover metallic N111831 Pressure spring Z10022 Cover black N111863 Door spring Z30072 Cover metallic grey Z10709 Spacer B12322 Closure plate Z12085 Spacer...
The hardening of the paint is finished after the first as well as the regulations and rules applicable locally� heating with high power� RIKA stoves should only be installed in rooms with normal humidity (dry areas according to VDE 0100 Part 200)� The furnaces are not Safety distances splash water protected and may not be installed in wet areas�...
Stoves type 1 (BA 1): Prior to set up Suitable for multiple occupancy� (Note the different country Floor bearing capacity regulations�) Ensure that the substructure is capable of bearing the weight of the These may only be operated with the combustion chamber door stove prior to set-up�...
3. BRIEF INFORMATION ON COMBUSTIBLE - LOGS Suitable fuels and fuel amounts Output controlling Your stove is generally suitable for burning dry firewood� You can The output of your stove is regulated manually or via the Rikatronic- also burn combustibles such as wood briquettes� control�...
Connect at the air intake either a pipe Ø 125 mm for log wood and combi stoves, or Ø 50 mm or Ø 60 mm for pellet stoves� Fix it with We recommend original flue pipes from RIKA for proper connection� a hose clamp (not included!)� At pellet stoves with longer intake pipes than 1 m the diameter should be increased to 100 mm�...
2� Now place further pieces of chipboard in crosswise layers on top of 100% secondary air the logs and place 2-4 ribs of the RIKA-firelighter on the left on top of 0% primary air the chipboard�Some uncoated paper can be placed underneath the chipboard in case there is no firelighter available�...
In general the riddle grate should stay open� RIKA firelighter Always ignite the RIKA firelighter on the red tip� One block consists out of 8 ribs which can be divided to the desired size� The amount of RIKA firelighters also depends on the size and humidity of your firewood�...
Adding wood Power failure Fill amount for heating up: 2 logs of max� total 2�5kg, depending on In the event of a power failure the air regulation flap remains requirements� unchanged until the fire goes out (no display)� If mains voltage is available again after a brief power failure, the display lights up as The red flashing phase varies depending on the ambient influences green...
Status displays LED display Meaning Action to be taken The stove has just been switched on and the The stove cannot heat up until the display air flaps start the reference run� lamp stops flashing� The control system starts a reference run again after a brief power failure�...
(see Cleaning and Maintenance). The temperature sensor is defective. Contact RIKA customer service. The display lamp flashes 1x RED and 1x YELLOW The magnetic switch is defective or Check whether an object is blocking the jammed.
7. MAINTENANCE AND CLEANING Basic information Cleaning of painted surfaces Wipe of the painted surfaces with a damp cloth, do not scrub� Do not Note use solvent-containing cleaners� Your stove must be switched off and cooled before any maintenance work is performed� Ensure that you do not vacuum Cleaning the flame temperature sensor into the combustion air line during heating operation during any cleaning (vacuuming)�...
8. ASSEMBLY/ DISASSEMBLY STONE AND OPTIONS Lift the smoke tube outlet and the cover plate� Note Only perform manipulation of the unit when the mains plug of the stove has been disconnected (RIKATRONIC3) and the stove has cooled down completely� Note Take special care of your fingers and all stove panels and stove attachments during any conversion work�...
9. PROBLEMS - POSSIBLE SOLUTIONS Problem 1 Problem 2 Fire burns with weak, orange flame, window is sooted up� Stove smells strongly and / or fumes are emitted� Cause(s) Cause(s) Poor chimney draught Burning-in phase (taking into service) Damp wood Stove has accumulated dust and/or dirt Possible solution(s) Incorrect heating up...
In cases of doubt, or in the case of missing or incorrect translations, the German version is always the sole valid version. In the interest of ensuring damage limitation in good time, the guarantee claim should be sent in writing to the RIKA specialist or contract dealer.
Page 21
Electronic Waste RIKA Innovative Ofentechnik GmbH is ensuring that its products are eco-friendly throughout the product life cycle� This is why our commitment for electronic products goes beyond the end of their product life cycle� In accordance with the European Directive (2012/19/EU) Waste Electrical and Electronic Equipment (WEEE) and other local regulations, RIKA supports the setup of take-back systems and recycling infrastructures�...
Need help?
Do you have a question about the RIKATRONIC3 IMPOSA and is the answer not in the manual?
Questions and answers