Entering Data - EDAN Norav NECG-12 Operating Manual

NECG-12

4.1.2 Entering Data

Take the Patient Information window for example:
1. Press F1 below Patient on the main screen1 to open the Patient Information window.
2. Press Tab or Shift + Tab to move the cursor to the Name textbox.
 To input patient name, press the letter or numeric keys on the keyboard.
 To input the special character in the top right corner of the key, press Fn and a letter key.
For example, press Fn + a to input è.
 To input the special character in the top right corner of the key, press Shift and a numeric
key.
For example, press Shift + 3 to input #.
 When Caps Lock is set to Off in the Other Setup window, pressing Shift and a letter
key can input a capital letter.
For example, pressing Shift + P can type a capital P.
 When Caps Lock is set to On in the Other Setup window, pressing Shift and a letter
key can input a lowercase letter.
For example, pressing Shift + P can type a lowercase p.
3. Press Bksp on the keyboard to erase the typed information.
4. Press Enter to confirm, or press Tab or Shift + Tab to move the cursor to the OK button, and
then press Enter to confirm.
5. Press Esc to cancel the operation, or press Tab or Shift + Tab to move the cursor to the
Cancel button, and then press Enter to cancel the operation.
6. Press Shift+Bksp to refresh all patient information except for the Gender, Age Group,
Exam.Room, Physician and Technician information after you print an ECG report.
Electrocardiograph User Manual
- 37 -
Basic Operation Guidance