Receiving Documents Manually-Manual Mode - Canon MP-C635 User Manual

Receiving Documents Manually—Manual Mode
You will want to set your MultiPASS to receive documents manually
when you want to personally check each incoming call to see if it is from
a fax or from a person. You must have a telephone attached to the
MultiPASS.
When the telephone attached to the MultiPASS rings, pick up the
telephone.
❍ If you hear a person's voice, start your conversation. If the caller
wants to send a document after talking to you, confirm that the
document is loaded and request that the caller press the
button. Wait on the line until you hear a slow beep or silence
(depending on the sending fax unit), then press
receive the document.
❍ If you hear a slow beep or silence, another fax is trying to send you a
document. Press
START/COPY
❍ Hang up the telephone after the MultiPASS displays
don't hang up, the MultiPASS beeps intermittently for a few seconds
after you receive the document. To disable the beeping, turn off the
Off Hook Alarm option on the Advanced Send Fax panel. For
details, see "Setting Up Advanced Send Fax Options" in Chapter 3,
Using the MultiPASS Fax Setup Utility.
Using the Telephone for Remote Reception of a Fax
If you pick up the handset of the telephone connected to the MultiPASS
and you hear a fax tone, you can start receiving the document manually
by entering a two-digit ID code from the phone. This is particularly
convenient if you are using a cordless phone and you answer the phone
away from the MultiPASS.
To use this feature, the telephone must be plugged into the telephone
jack of the MultiPASS (see your Quick Start Guide for details). The
Remote Receive option must be enabled on the Advanced Receive Fax
panel. (The default is enabled.) For details, see "Setting Up Advanced
Receive Fax Options" in Chapter 3, Using the MultiPASS Fax Setup
Utility.
Chapter 5
.
START/COPY
Your MultiPASS begins receiving the document.
START
to
START/COPY
. If you
RECEIVE
Receiving Faxes 5-3