Canon MP-C635 User Manual page 74

Auto Start Send
When you select this option, the MultiPASS starts scanning automatically
when you enter a number and press
dial number. If you don't select this option, you must press
to scan the document. The default is Auto Start Send enabled.
Off Hook Alarm
You select this option to turn on the alarm if the telephone's handset is
off-hook. The default is Off Hook Alarm enabled.
Image Contrast
You can select a setting that determines the level of contrast in the
faxes you send. The default is Standard; this setting is usually
appropriate for most documents. However, based on the lightness or
darkness of your original fax document, you may prefer to lighten
(Lighter) or darken (Darker) the contrast for the fax transmission.
Fax Heading Position
You can select where you want the sent fax heading information (your
fax number, your name, and date and time) to print on the faxes you
send. This information is known as the Transmit Terminal Identification
(TTI). Choose between Outside Imaging Area (the default) and Inside
Imaging Area.
On Error Resend
You can select this option if you want the MultiPASS to automatically
redial when an error occurs while sending a fax. If this option is selected,
you also select which pages should be resent:
All Pages—all pages of the fax.
Error and First Page—the page on which the error occurred, all
pages following the error, and the first page of the fax.
Error Pages—the page on which the error occurred, and all
following pages. This is the default.
Restore Defaults
If you want to restore the options on the Advanced Send Fax panel to
the factory defaults, click the Restore Defaults button.
3-6 Using the MultiPASS Fax Setup Utility
or when you press a speed
START
twice
START
Chapter 3