Mechanical Section (With Regard To The Sewing Machine); Specifications; Preparation Of The Sewing Machine; Threading The Machine Head - JUKI AMS-210EN-7450 Instruction Manual

!. MECHANICAL SECTION (WITH REGARD TO THE SEWING MACHINE)

1. SPECIFICATIONS

1 Sewing range
2 Max. sewing speed
6 Needle
11 Shuttle
17 Max. sewing speed limitation
Noise
33
※1
The sewing range can be expanded to 130 mm x 60 mm by using the intermediate presser (40023632). In this
case, change the service level K056, K057, K058 and K059 to the initial value for the AMS-210EN 1306. (Refer
to the Engineer's Manual or contact the distributor for detailed explanation of setting.) If the sewing area is
expanded without changing the intermediate presser, the intermediate presser can hit against the feeding frame.
※2
"sti/min" is an abbreviation for "stitches per minute."

4. PREPARATION OF THE SEWING MACHINE

4-4. Threading the machine head

WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start or
the sewing machine.
Standard
X (lateral) direction Y (longitudinal) direction
124 mm ×
※2
2,000 sti/min
GROZ-BECKERT 135x17, ORGAN needle DPx17
Standard semi-rotary hook
※2
200 to 2,000 sti/min (Scale : 100 sti/min
- Equivalent continuous emission sound pressure level (L
A-weighted value of 79.5 dB; (Includes K
C.6.3 -ISO 11204 GR2 at 2,000 sti/min for the sewing cycle, 52s ON (Pattern :
No.64).
Wind needle thread here
by one and a half turn
– 1 –
※1
54mm
※2
steps)
) at the workstation :
pA
= 2.5 dB); according to ISO 10821-
pA