Packaging Process - Quectel EG915U Series Hardware Design

Packaging Process

Place the packaged plastic reel, humidity
indicator card and desiccant bag into a
vacuum bag, vacuumize it.
EG915U_Series_Hardware_Design
Figure 43: Tape and Reel Directions
LTE Standard Module Series
Place the module into the carrier tape and
use the cover tape to cover it; then wind the
heat-sealed carrier tape to the plastic reel
and use the protective tape for protection. 1
plastic reel can load 250 modules.
Place the vacuum-packed plastic reel into
the pizza box.
84 / 91