Plastic Reel; Packaging Process - Quectel EG060K Series Hardware Design

8.3.2. Plastic Reel

Table 56: Plastic Reel Dimension Table (Unit: mm)
øD1
330

8.3.3. Packaging Process

Place the packaged plastic reel, humidity
indicator card and desiccant bag into a
vacuum bag, then vacuumize it.
EG060K &EG120K _Series_Hardware_Design
103
Figure 52: Plastic Reel Dimension Drawing
øD2
100
W
56.5
Place the module into the carrier tape and
use the cover tape to cover them; then wind
the heat-sealed carrier tape to the plastic reel
and use the protective tape for protection.
One plastic reel can load 200 modules.
LTE-A Module Series
98 /