3.2.2.2. USB Application with USB Suspend/Resume and MAIN_RI Wakeup Function
If the host supports USB Suspend/Resume, but does not support remote wakeup function, the MAIN_RI
signal is needed to wake up the host.
The following figure shows the connection between the module and the host.
⚫
Sending data to the module through USB will wake up the module.
⚫
When the module has a URC to report, the URC will trigger the behavior of MAIN_RI pin.
EG915U_Series_Hardware_Design
Module
USB_VBUS
USB_DP
USB_DM
AP_READY
MAIN_RI
GND
Figure 5: Sleep Mode Application with MAIN_RI
LTE Standard Module Series
Host
VDD
USB_DP
USB_DM
GPIO
EINT
GND
29 / 81