Table of Contents
Advertisement
Device Management
3.2 Configuring the Device
Communication Ports
Connect any of the available Ethernet ports on the device to a management switch
and access the RUGGEDCOM RS416F console and Web interfaces via the device's IP
address. For more information about available ports, refer to
(Page
3.2
Configuring the Device
Once the device is installed and connected to the network, it must be configured. All
configuration management is done via the RUGGEDCOM RS416F interface. For more
information about configuring the device, refer to the RUGGEDCOM RUGGEDCOM
RS416F User Guide associated with the installed software release.
22
23)".
"Communication Ports
RUGGEDCOM RS416F
Installation Manual, 04/2021, C79000-G8976-1354-04
Advertisement
Table of Contents
Need help?
Do you have a question about the SIMATIC NET RUGGEDCOM RS416F and is the answer not in the manual?
Questions and answers