Table of Contents
Advertisement
1-9. System Initial Setup
1-9-2. Installing Graphic Board Driver
After turning the power on, first follow the Microsoft
Windows2000 Professional Quick Start (Page 6 and after)
to set up Windows.
The product key is adhered on the top of the DMW-
S01NL/S02NL main unit. Then install the graphic board
driver in the following procedure.
m
1. Be sure to log in with administrator. The default
administrator is without password.
2. Connect two monitors to the system for dual-head
setting.
3. Make sure to use the provided file for driver operation.
(1) After log-in, Window appears. Go to step 2 directly.
(In this case, do not click "Cancel".)
1-38
(2) Start the explorer from the start menu.
(3) Activate
"C : \Programfiles\Sony\DMW\G400\Setup".
a) Click "My Computer".
b) Click "Local disk".
c) Click "Program Files".
d) Click "Sony".
e) Click "DMW".
f) Click "G400".
g) Double-click "Setup.exe".
* Click "+" at the left side of the folder in "Folders"
window.
DMW-S01NL/S02NL/ST001
Advertisement
Table of Contents
