5. While closing the eject levers in the direction of arrow
1, push in the plug-in board.
1
Eject lever
(The illustration shows the MVS-8000A.)
6. Attach the plug-in board loose-proof assembly and the
front panel by reversing the installation steps of 2, 3.
MVS-8000A option
Name of option
Name of board
MKS-8160A
OUT-28 board
MKS-8210A
MIX-48A board
MKS-8440A
MY-112B board
MKS-8170M
DIF-141 board
MKS-8420M
CC-90 board
MVS-8000ASF option
Name of option
Name of board
MKS-8210A
MIX-48A board
MKS-8440A
MY-112B board
MKS-8170M
DIF-141 board
MKS-8420M
CC-90 board
1-6
1
Eject lever
Slot on the front side
14
1, 3
15, 16
4
13
Slot on the front side
1
7
2
6
1-4-2. Installing the Connector Board
1. Remove the two screws and remove the blank panel.
n
Store the removed blank panel in a safe place.
(The illustration shows the MVS-8000A.)
B3 x 5
Blank panel
B3 x 5
MVS-8000A/8000ASF