Table of Contents
Advertisement
4-4. Reinstallation
(4) Select "Setting" → "Base Setting..." from menu.
Base Setting dialog will be displayed.
(5) Click "Internet Mail" to select it, then click the
"Configure" button.
Internet Mail Base Setting dialog will be displayed.
4-18
(6) In the "Mail Server (SMTP)" column, enter the
address or IP of the SMTP mail server. In the
"E-mail Address", set the sender address (a
convenient address remaining on the mail. The user
address is also acceptable) and click the "OK" button
to close the dialog.
n
Click "OK". The system tries to connect the newly
configured mail server and checks if it exists on the
network. If it is not reachable, the system reports an
error and becomes unable to close the dialog. Config-
ure an Internet connection prior to this procedure.
(7) Also click the "OK" button to close the Base Setting
dialog.
(8) Click "Setting" → "Destination Setting..." from Alert
Manager dialog menu.
Destination Setting dialog will be displayed.
(9) Click the "Internet Mail", and click the "Modify ID..."
button.
DMW-S01NL/S02NL/ST001
Advertisement
Table of Contents
