Table of Contents
Advertisement
4-4. Reinstallation
(3) Select "Internet Mail" from "ID List:", and click the
"Add−>" button.
(4) "Internet Mail" is added to "Group Member".
(5) For example, a case when a fan is forcibly stopped is
shown below.
About one minute after forcibly stopping the fan, the
following popup dialog appears and also the error log
is recorded for the Alert viewer.
At the same time, an Alert Message is also sent to the
mail address.
4-20
4. Setting the Alert reporting schedule
You can set the time setting for reporting, the number of
retrials, and its time limit.
(1) Clicking the "Schedule" button at the ID Setting
dialog.
Schedule dialog will be displayed.
(2) Specify the number of retrials in the "Retry Interval"
box, and its duration in the "Whole Retry Time".
The default value for this setting can be used as is.
(3) Edit the time table for email report in "Reporting Time
Table" section.
Blue area on the bar indicates time period that the
application transmit reports.
The blue area becomes white by mouse click, and the
application will not transmit any report during the
period. The time table is initially set at one hour
interval. Modify the setting appropriate to each
services.
DMW-S01NL/S02NL/ST001
Advertisement
Table of Contents
