Table of Contents
Advertisement
1-9. System Initial Setup
1-9-3. Installing AV processing board driver
Next install the AV processing board driver.
(1) Insert the application installation CD-ROM in the CD-
ROM driver. (The CD-ROM drive is hereinafter
referred to as "D :".)
(2) Start the explorer from the start menu.
(3) Start "D : \CODI\CODI_v1.1.exe".
a) Click "My computer".
b) Click "D drive".
c) Click "CODI".
d) Double click "CODI_v1.1. exe".
(4) As shown below, the AV processing board installer
starts. Click "Next >".
1-42
(5) The installation of the driver begins. Wait until the
installation ends.
(6) After the installation end, the restart confirmation
screen below appears. Click "Finish" to restart the
system.
(7) After restart, log in with administrator and confirm
that the multi-media controller driver is registered
automatically.
DMW-S01NL/S02NL/ST001
Advertisement
Table of Contents
