10. Connect the flexible flat cable (30 pins) to CN2 on the
EX-849 board.
n
When connecting, make sure put contacting face of the
flexible flat cable to bottom side, then connect it to
CN2 of the EX-849 board.
11. Connect another side of the flexible flat cable (30 pins)
to CN102 of the EX-848 board installed on the IF02
Assy.
CN102
Contacting face
n
When connecting, make sure put contacting face of the
flexible flat cable to bottom side, then connect it to
CN102 on the EX-848 board.
DMW-S01NL/S02NL/ST001
EX-849 board
CN2
Contacting face
Flexible flat cable
EX-848 board
Flexible flat cable
12. Install the IF02 Assy to the slot 6.
EX-849 board
13. After installing the IF02 Assy, connect CN1 on the
EX-849 board to the 180P connector on the AV
processing board.
AV processing board
EX-849 board
CN1
1-10. Installation of DMW-IF02
IF02 Assy
IF02 Assy
Slot 6
1-49