Flange-Mounted Brake With External Hub; Figure 13 Installation Components; Figure 14 Installed Brake - KEB COMBINORM Instruction Manual

Installation

5.4.3 Flange-Mounted Brake with External Hub

Figure 13 Installation Components

Number Description
1 Shaft
2 Mounting Surface
3 Magnet
4 Key
5 Socket-Head Screws (ISO 4762)
6 Armature with External Hub
7 Set Screw
1. Align the magnet (3) to the mounting surface (2) such that the magnet is centered over
the shaft.
→
2. Fix the magnet (3) to the mounting surface (2) with socket-head screws (5).
3. Mount the armature/hub assembly (6) over the shaft (1) and slide toward the magnet
until the armature and magnet are separated by an air gap of width X (shim washers
can be used between hub and shaft shoulder).
→
4. Secure the armature assembly (6) in place using a set screw or shaft bolt and washer
end plate as shown on the next page.
2021 KEB America, Inc.
©
See Brake Centering for details.
See Adjusting the Air Gap for details.

Figure 14 Installed Brake

27