Shaft-Mounted Brake; Figure 16 Installation Components; Figure 17 Installed Brake - KEB COMBINORM Instruction Manual

Installation

5.4.4 Shaft-Mounted Brake

Figure 16 Installation Components

Number
1
2
3
4
5
6
7
1. Install the key (4) onto the shaft (1).
2. Slide the brake assembly (3) onto the shaft (1) and key (4).
3. Fix the brake assembly (3) to the mounting surface (2) with socket-head screws (5).
4. Secure set screw.
2021 KEB America, Inc.
©
Description
Shaft
Mounting Surface
Brake Assembly
Key
Socket-Head Screws (ISO 4762)
Built-In Armature Element
Set Screw
 The shaft-mounted brake comes pre-configured with an appropriate
i
air gap between armature and magnet. The air gap does not need to
be adjusted during installation.

Figure 17 Installed Brake

29