Personal Protective Equipment; Permissible Friction Work - KEB COMBINORM Instruction Manual

Safety Instructions

Ensure the device is powered off and has come to a complete stop before
performing any maintenance.

Secure the brake so it cannot be switched on accidentally during maintenance.

Disconnect the brake from the load before maintenance to avoid uncontrolled
movements.

Ensure there is sufficient protection against foreign particles entering the air gap
during maintenance.

Ensure there is sufficient protection against moisture or aggressive gasses that
may compromise the integrity of the friction surface or armature.

Ensure the friction lining does not come into contact with cleaning agents or
solvents.

2.7 Personal Protective Equipment

When installing or performing maintenance on the brake, use the following personal
protective equipment:

Long-sleeved protective clothing

Safety gloves

Safety shoes

Safety goggles
The personal protective equipment must be provided by the operating company and must
comply with any applicable safety regulations.
→
See Standards for COMBINORM Type 02 Brakes for details.

2.8 Permissible Friction Work

When operating the brake adhere to the friction work values specified in Appendix B:
Technical Specifications, taking the speed and frequency of operation into account.
Exceeding these values may result in thermal overload of the friction lining and a strong
decrease in braking torque.
16 2021 KEB America, Inc.
©