Troubslehsooting; Support - ElectrIQ eiQSRG60 User Manual

TROUBLESHOOTING
FAULT
Light on, but fan
does not work
Both light and
fan do not work
Excessive
Vibration
Suction
performance
not good
INFORMATION FOR DISMANTLING
Do not dismantle the appliance in a way which is not shown in the user manual. The appliance
could not be dismantled by user. At the end of life, the appliance should not be disposed of with
household waste. Check with you Local Authority or retainer for recycling advice.
electriQ UK SUPPORT
Recycling facilities are now available for all customers at which you
can deposit your old electrical products. Customers will be able to
take any old electrical equipment to participating sites run by their
local councils. Please remember that this equipment will be further
handled during the recycling process, so please be considerate
when depositing your equipment. Please contact the local council for
details of your local household waste recycling centres.
CAUSE
The fan blade is
jammed.
The motor is
damaged.
Light bulb blown
Power cord loose
The fan blade is
damaged.
The fan motor is not
fixed tightly.
1 Grease filters
clogged
2 Distance between
the unit and the
cooking plane too
great.
www.electriQ.co.uk/support
www.electriQ.co.uk
Call: 0330 390 3061
Office hours: 9AM - 5PM Monday to Friday
Unit J6, Lowfields Business Park
Lowfields Way, Elland
West Yorkshire, HX5 9DA
SOLUTION
Switch off the unit. Repair to be carried
out by qualified service personnel only.
Replace the bulb with correct rating.
Plug in to the power supply again.
Switch off the unit. Repair to be carried
out by qualified service personnel only.
Switch off the unit. Repair to be carried
out by qualified service personnel only.
1 Clean or replace grease filters.
2. Readjust the distance to between
65cm and 75cm.
14