Table of Contents
Advertisement
TROUBLESHOOTING
FAULT
Light on, but
fan does not
work
Both light and
fan do not
work
Excessive
Vibration
Suction
performance
reduced
INFORMATION FOR DISMANTLING
Do not dismantle the appliance other than shown in the user manual. The appliance
cannot be dismantled by user. At the end of life, the appliance should not be
disposed of with household waste. Check with you Local Authority for recycling
advice.
electriQ UK SUPPORT
Unit J6, Lowfields Business Park Lowfields Way, Elland
Recycling facilities are now available for all customers at which
you can deposit your old electrical products. Customers will be
able to take any old electrical equipment to participating sites run
by their local councils. Please remember that this equipment will
be further handled during the recycling process, so please be
considerate when depositing your equipment. Please contact the
local council for details of your local household waste recycling
centres.
CAUSE
The fan blade is
jammed.
The motor is damaged.
Light bulb blown
Power cord loose
The fan blade is
damaged.
The fan motor is not
fixed tightly.
Grease filters clogged
Distance between the
unit and the cooking
plane too great.
www.electriQ.co.uk
Call: 0330 390 3061
Office hours: 9AM - 5PM Monday to Friday
West Yorkshire, HX5 9DA
SOLUTION
Switch off the unit. Repair to be carried
out by qualified service personnel only.
Replace the bulb with correct rating.
Plug in to the power supply again.
Switch off the unit. Repair to be carried
out by qualified service personnel only.
Switch off the unit. Repair to be carried
out by qualified service personnel only.
Clean or replace grease filters.
Readjust the distance to between 65cm
and 75cm.
14
Advertisement
Table of Contents
