ElectrIQ eiQSRG60 User Manual page 8

5. Install the outside chimney bracket onto the outside chimney with 2 ST4*8mm
screws, here should be sure the inside chimney can be flexed freely. See Pic 5.
6. Fix the cooker hood with 2pcs ST4*30mm safety screws. Note: The two safety
vents are positioned on the back housing, with a diameter of 6mm.Put the two
chimneys onto the cooker hood, fix the outside chimney on the wall with 2pcs
ST4*40mm screws and lead the expansion pipe to the outside. See pic 6.
7. Adjust the height of the inside chimney to the position of the inside chimney bracket
and fix on it with 2pcs ST4*8mm screws. Fix the outside chimney onto the hood
body with 2pcs ST4*8mm screws. See Pic 7.
8