INSTALLATION
If you have an outlet to the outside, your cooker hood can be connected as below
picture by means of an extraction duct (enamel, aluminum, flexible pipe or non-
flammable material with an interior diameter of 150mm)
1. Before installation, turn the unit off and unplug it from the outlet.
2. The cooker hood should be placed at a distance of 65~75cm above the cooking
surface for best effect.
3. After decide the cooker hood height, measure the position of the holes for hanging
hood , inside chimney bracket ,outside chimney bracket and safety holes. Drill 8 φ8
holes and insert wall plugs into the holes. Fix the inside chimney bracket on the
wall with 2pcs ST4 x 40mm screws. Screw 2pcs ST4 x 8mm screws in the hole for
hanging the hood body and the screws installed should leave for 3-5mm out of the
wall to hang the hood. The fixed position of the inside chimney bracket is the
highest place of chimney. See pic 2.
4. Install the converter, v-flap and expansion
pipe onto the cooker hood. Fix the expansion
pipe on the outlet with a cable tie. See Pic 3.
Note: The expansion pipe is not included in
the product. Hang the cooker hood onto the
hook. See pic 4.
7