ElectrIQ eiQSRG60 User Manual page 6

INSTALLATION (VENT OUTSIDE)
MOUNTING OF THE V-FLAP
If the cooker hood does not have an assembled V-flap 1, you should mount the half-
parts to its body. The images only show an example of how to mount the V-flap, the
outlet may be various according to different models and configuration.
To mount the V-flap 1 you should:
1. Mount two half-parts "2" into the body "6"
2. A pin 3 should be top oriented
3. The axis "4" should be inserted in the holes "5" on body
4. Repeat all the operations for the 2nd half-part
6