Table of Contents
Advertisement
ADJUSTMENT OF PRIMARY- AND SECONDARY AIR/COLD STOVE
The primary air (1) is controlled by the lower damper (shown with a match and a small flame).
The secondary air (2) is controlled by the upper damper (shown with a big flame).
When firing a cold stove, pull both dampers to the right. The primary air damper will meet a stop (3).
Lift up the handle for the primary air damper and then pull it all the way to the right (4).
See our video about correct firing and adjustment of primary- and secondary air on www.scan.dk or scan the QR-code on
next page.
ADJUSTMENT OF PRIMARY- AND SECONDARY AIR/WARM STOVE
When the stove is warm, adjust the primary- and secondary air dampers to 20/80 (5).
As long as the stove is warm, the primary air is only to be adjusted within the area before the stop (3).
Primary air: 0-20% at soft wood
Secondary air: 70-80%
Dampers for
primary- and
secondary air.
Indstilling af Luftspjæld
Stove:
Scan 80
Name:
Material:
Articlenumber:
Weight:
N/A
Area:
N/A
C:\Working Folder\Designs\Scan 80\90580032.idw
Path:
18
N ( 0,40 : 1 )
Damper for
primary air
Pull the primary air damper
3
to the right, until you reach
a stop.
N
Drawing
Date:
18-05-2017
90580032
number:
Constructed/Changed by:
jwa
SCAN A/S
DK-5492 Vissenbjerg©
2
1
Damper for
secondary air
When firing a cold stove, lift
4
the damper up over the stop
and all the way to the right.
When the stove is warm, you can
5
adjust the primary- and secondary
air to:
20% primary air
80% secondary air
Advertisement
Table of Contents
