Backup / Restore The Project - ABB AccessControl System Manual

3.4

Backup / restore the project

Fig. 46: Data backup / data restoration
Create the first data backup after the first initialization has been completed.
Then create a backup after every major change, such as the addition or deletion of devices.
To create the data backup, carry out the following steps:
1. Connect a PC with the "Smart Access Point".
– More detailed information for connecting, see chapter 3.1.2 "Connecting a PC with the
"Smart Access Point "" on page 33
2. In the main menu of the "Smart Access Point", change to the "Settings" function.
3. Change to the "Project backup" function.
Creating data backup
1. The backup file is created via the "Create new project backup" function.
Playback of data backup
1. The backup file is imported via the "Import project backup" function.
Attention! Loss of data
If no backup is available and the data in the "Smart Access Point" are lost, the
battery-operated access systems can no longer be uncoupled for re-
commissioning. The old data remain in the reading heads. Since these are
locking systems, access from outside is not possible. This could be an
unauthorized access.
–
System Manual 2CKA001473B5074
The battery-operated access systems must then be reset in the
manufacturer's factory.
– Make absolutely certain that you have a backup of the data of the "Smart
Access Point".
Commissioning
│59