Deleting The "Rf/Ip Gateway" From The System - ABB AccessControl System Manual

5.8.1

Deleting the "RF/IP Gateway" from the system

Use the following steps to delete a "RF/IP Gateway":
Fig. 178: Deleting the "RF/IP Gateway" from the system
1. Mark the "RF/IP Gateway" [1].
2. Click on the "Delete" button [2].
Fig. 179: Confirming the deletion of the "RF/IP Gateway"
3. Confirm the question with button [1].
– The "RF/IP Gateway "is deleted.
System Manual 2CKA001473B5074
Management software in the "Smart Access Point Pro"
│164