Coupling The "Rf Repeater - ABB AccessControl System Manual

5.4.6

Coupling the "RF Repeater"

Use the following steps to couple the "RF Repeater" with the "Smart Access Point Pro":
Fig. 126: Coupling the "RF Repeater" with the "Smart Access Point Pro"
1. Pull the "RF Repeater" [1] from the list into the desired room.
2. Click on the "RF Repeater" [1].
3. Click on the "Smart Access Point Pro" [2].
Fig. 127: Coupling process
– The progress of the coupling process is displayed in the window
System Manual 2CKA001473B5074
Management software in the "Smart Access Point Pro"
│129