Electronic Cylindrical Lock" Settings - Emergency Function - ABB AccessControl System Manual

Table of Contents

5.3.3

"Electronic cylindrical lock" Settings ‒ Emergency function

In the setting area of the "Electronic cylindrical lock" various device statuses can be viewed and

settings made.

A prerequisite for some areas is that the "Electronic cylindrical lock" has already been coupled

and a user with a transponder card has a closing right for the "Electronic cylindrical lock".

The following example lists the setup of the emergency situation for a transponder key. With this

emergency card the selected "Electronic cylindrical lock" can also be opened when the

"Electronic cylindrical lock" has no radio connection to the "Smart Access Point Pro". This, for

example, is the case during a power failure of the "Smart Access Point Pro" or in a room to

which a radio connection has not been set up.

Use the following steps to set up the emergency card for a "Electronic cylindrical lock":

Fig. 93:

Setting area of the "Electronic cylindrical lock"

1. Display the setting area of the "Electronic cylindrical lock".

–

For this, click on the desired "Electronic cylindrical lock" [1].

Fig. 94:

"Electronic cylindrical lock" emergency function setting

System Manual 2CKA001473B5074

Management software in the "Smart Access Point Pro"

│107

Table of Contents