Delete Device In The "Smart Access Point; Electronic Cylindrical Lock; Rf/Ip Gateway; Rf Repeater - ABB AccessControl System Manual

3.3

Delete device in the "Smart Access Point"

3.3.1

"Electronic cylindrical lock"

If the "Electronic cylindrical lock" is to be removed from the system, this is carried out in the
management software of the "Smart Access Point Pro".
1. Uncoupling the "Electronic cylindrical lock", see chapter 5.7.1 "Uncoupling "Electronic
cylindrical lock" from "Smart Access Point Pro" " on page 153.
2. Removing the "Electronic cylindrical lock" from the building structure, see chapter 5.7.2
"Removing the "Electronic cylindrical lock" from the room " on page 156.
3. Removing the "Electronic cylindrical lock" from the management software, see chapter 5.8.1
"Deleting the "Electronic cylindrical lock" from the system" on page 162.
3.3.2

"RF/IP Gateway"

If the "RF/IP Gateway" is to be removed from the system, this is carried out in the management
software of the "Smart Access Point Pro".
1. Removing the "RF/IP Gateway" from the building structure, see chapter 5.7.5 "Removing
the "RF Repeater" from the room" on page 160.
2. Removing the "RF/IP Gateway" from the management software, Page 164.
3.3.3

"RF Repeater"

If the "RF Repeater" is to be removed from the system, this is carried out in the management
software of the "Smart Access Point Pro".
1. Uncoupling the "RF Repeater", see chapter 5.7.4 "Uncoupling the "RF Repeater" Fehler!
Textmarke nicht definiert." on page 158.
2. Removing the "RF Repeater" from the building structure, see chapter 5.7.5 "Removing the
"RF Repeater" from the room" on page 160.
3. Removing the "RF Repeater" from the management software, see chapter 5.8.2 "Deleting
the "RF Repeater" from the system" on page 163.
System Manual 2CKA001473B5074
Commissioning
│58