Coupling The "Electronic Cylindrical Lock" With The "Smart Access Point Pro - ABB AccessControl System Manual

5.4.4

Coupling the "Electronic cylindrical lock" with the "Smart Access Point Pro"

Attention! Loss of data
If no backup is available and the data in the "Smart Access Point" are lost, the
battery-operated access systems can no longer be uncoupled for re-
commissioning. The old data remain in the reading heads. Since these are
locking systems, access from outside is not possible. This could be an
unauthorized access.
–
The newly created "Electronic cylindrical lock" must now be linked (coupled) with the "Smart
Access Point Pro".
Use the following steps to couple the "Electronic cylindrical lock" with the "Smart Access Point
Pro":
Fig. 116: Coupling the "Electronic cylindrical lock" with the "Smart Access Point Pro"
1. Click on the "Electronic cylindrical lock" [1].
2. Click on the "Smart Access Point Pro" [2].
System Manual 2CKA001473B5074
Management software in the "Smart Access Point Pro"
The battery-operated access systems must then be reset in the
manufacturer's factory.
– Make absolutely certain that you have a backup of the data of the "Smart
Access Point".
│122