Deleting Rooms - ABB AccessControl System Manual

5.9.1

Deleting rooms

Fig. 181: Warning message
Notice
A room can only be deleted if it contains no devices.
–
Use the following steps to delete rooms:
Fig. 182: Delete room
1. Search for the room [1] in the building structure and mark it.
2. Click on the "Delete" button [2].
– The room is deleted.
3. Repeat the step until all desired rooms have been deleted.
System Manual 2CKA001473B5074
Management software in the "Smart Access Point Pro"
Delete all devices of the room before deleting the room, see chapter 5.8
"Deleting data from the "Device configuration" menu" on page 161
│166