Product Introduction - Ltech LT-912 Manual

www.ltech-led.com

Product introduction

1. Designed for Hi-power multiple channels application, 12 channels output, and up to
1152W output power.
2. Easy operation with digital display and the touch buttons.
3. 3-pin XLR, RJ45 and green terminal DMX interface with photoelectric isolation,
improve signal transmission efficiency and anti-interference ability, the green
terminal also has signal amplifier function.
4. With RDM remote management protocol,
RDM master console, such as parameters browsing & settings, DMX address
settings, equipment recognition, etc.
5. With firmware upgrade function.
6. With short circuit / overheat / over current protection, as well as warning function
when a fault occurs.
7. With power-on state management and fast self-testing function.
8. High/low PWM frequency
9. 16bit (65536 levels) / 8bit (256 levels) grey level available.
RJ45
3-pin XLR
the operations can be completed via the
available.
Photoelectric
RDM
isolation
1
Overheat
Short circuit
protection
protection
Over current
protection