User guide DRIVER 230 CPL 3 zone weekly programmer using power line carriers DELTA DORE - Bonnemain 35270 COMBOURG - FRANCE E-mail : deltadore@deltadore.com Device complying with the requirements of the directives: 2004/108/EEC (electromagnetic compatibility) and 2006/95/EEC (low voltage safety).
Knob selection mark Identification of the heating zone Because of changes in standards and equipment, the characteristics given in the text and the illustrations of this document are not binding unless confirmed by Delta Dore. - 3 -...
Description Time Setting • Heating Programming - 1 customizable program per day and per zone - Automatic mode override: Turn the It is possible to use a different operating mode (Comfort, Press and release: slow forward. selector to Economy, etc.) from the current one, until the next change Press and hold: fast forward.
Comfort, Economy or Continuous Frost Change the programming Protection Turn the selector to PROG Z1. Permanent comfort The 1st time slot flashes on and off. Turn the selector to The programming uses Comfort for slots of one hour. 1 hour Press the buttons Economy for + (comfort) or - (economy)
Override with automatic return Adjustable frost protection (comfort or economy mode) (1 to 99 days) - Absence mode The selector is set to AUTO From the AUTO mode. The unit follows the program (e.g. comfort in zone 1 and Press for approximately economy in zone 2 and 3) 3 seconds until the suitcase...
With the TYDOM 520 radio option, up to 16 domotics pro- ducts can be associated (door/window magnetic contacts, DRIVER 230 CPL can be associated with a power line carrier telephone transmitter, alarm control unit, remote controls, etc.) telephone remote control (e.g. TYPHONE 2 CPL ) or a GECPL1 using the DRIVER CPL.
Domotic functions Operation with a Tydom 200 Operation with a TYDOM 300 telephone transmitter remote control By calling the TYDOM 300 telephone transmitter, let the From the home domain synthetic voice guide you to determine or modify the status of the heating system (see the TYDOM 300 transmitter You can shut down the installation by pressing guide).
Page 8
Domotic functions Maintenance Override according to the alarm status In the AUTO position only and if the function is activated: Diagnosis/Solutions - Starting up the control unit fully sets the installation to Nothing is displayed You have just switched the unit on. Economy mode in the 3 zones (up to the next change of pro- on the room unit screen.
Need help?
Do you have a question about the DRIVER 230 CPL and is the answer not in the manual?
Questions and answers