❷ Use; I Operating Principle; I User Interface Presentation En - Zodiac Z550iQ Instructions For Installation And Use Manual

Iaqualink control
Hide thumbs Also See for Z550iQ:
Table of Contents

Advertisement

❷ Use

2.1 I Operating principle

The heat pump uses the calories (heat) in the air to heat up your pool's water. The process to heat your pool's water to
the temperature you want may take a few days as it depends on the weather conditions, the heat pump's power and the
difference between the water temperature and the temperature you want.
The heat pump is ideal for maintaining temperature.
The hotter and more humid the air, the better your heat pump will perform.
Tip: to improve the heating and maintaining of your pool's temperature
• Anticipate the commissioning of your pool far enough in advance before you use it.
• For the temperature rise, set the water circulation to continuous (24/24) in "Boost" mode.
• To maintain the temperature throughout the season, run "automatic" circulation for the equivalent of the
water temperature divided by two (the longer this time, the more sufficient the operating range of the
heat pump to heat the pool), in "SMART" or "ECOSILENCE" mode.
• Cover the pool with a sheet (bubble canopy, canvas, etc.) to prevent heat loss.
• Take advantage of a period with mild outdoor temperatures (on average > 10°C at night); it will be even
more effective if it runs during the warmest hours of the day.
• Keep the evaporator clean.
• Set the temperature you want and let the heat pump run.
• Connect the "Heating priority"; the filtration pump and heat pump operating time will be set according
to requirements.
2.2 I User interface presentation
2.2.1 Display screen and keyboard
*Displays the temperature measured during the last operation of the heat pump.
Description
Padlock
Water flow
Mode
Air temperature
°C
°F
Temperature unit
Wi-Fi
Function
"On/off" (press for 3 seconds) or back/exit
Menu selection and access
To browse and adjust the values
Steady
Flashing
Keypad locked
Water flow too low or
Water flow okay
missing
Indicates the selected
mode
Air temperature
/
outside range of
operation.
Selected temperature
unit
Wi-Fi pairing in
Wi-Fi connected
progress
Measured water temperature*
Off
/
Keyboard unlocked
/
Air temperature inside
range of operation
/
Wi-Fi not connected
EN
/
/
/
10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Z550iq md4Z550iq md5Z550iq td5Z550iq md8Z550iq td8

Table of Contents