Snapping Roll; Gathering Chain - MacDon C Series Operator's Manual

Corn header

Hide thumbs Also See for C Series:

Table of Contents

Maintenance and lubrication

11.7.2 Snapping roll

The snapping rolls' bearings are filled up with Liton Ep2. Depending on usage they

will need to be re-greased using the fitting on the top of the roll. Every 250 hours it

needs to be re-greased.

The tightness of the screws of the snapping rolls must be checked regularly and

tightening them if necessary!

• If being in active use it must be lubricated every day using eco-friendly lubricant.

• Every day, check for abnormal wear and frictions

The corn head Pre-harvesting and Pre-delivery inspection checklists are at the end

of the operator's manual.

Please verify the corn heads condition before the first running procedure following

the Pre-delivery inspection.

Please verify the corn heads condition before each harvesting following the

Pre-harvesting inspection.

Table of Contents

Do you have a question about the C Series and is the answer not in the manual?