MacDon C Series Operator's Manual page 48

Normally the following adjustments can be made from (or at) the combine:
- corn head height above the ground,
- sensitivity (the amount of sensor movement before the system reacts),
- speed (how fast should the header move)
Required components for installation:
- In the spare parts catalogue 42. page there is a sensor assembly, 2 will be
needed of it.
- Wires (The number and type of the wires varies by combine type).
- Combine specific harness
Required components for mounting the system to a different type of combine:
- Harness for the specific combine type (1pcs)
- Sensors (2pcs)
The AHHC system cannot negate the need for human attention.
In case of a system failure the operator must intervene to pre-
WARNING!
vent accidents.
Harvesting
47