Remote Maintenance; Remote Maintenance Function; Connecting Itm To The Internet With The 3G Usb Modem - Daikin DCM601A51 User Manual

9-4 Remote Maintenance

Remote Maintenance function

Remote maintenance is a function that enables engineers to operate iTM from a remote location
connecting iTM to the Internet with the 3G USB modem. Using this function, they can create or
change the setup of iTM and cope with troubles without going to the site, which saves time and
cost. The following describes how to use this function.

Connecting iTM to the Internet with the 3G USB modem

(1)
Insert the 3G USB modem into the iTM.
(2)
Open "Menu List" after the LED of the modem becomes Green blink.
- The light of LED on the modem indicate as below
• Red light: No radio wave
• Green light: Catching radio wave but not connected
• Green blink: Connected
(3)
Open "Remote Maintenance" screen in "System Settings" tab on the iTM.
- If the modem is not inserted, "Remote Maintenance" button will not appear.
(4)
Select one of the access points shown on the list and push "Connect" to be online.
(5)
Tell the IP address shown in the "IP Address" box to a control engineer.
1. Select an access point
2. Push Connect
4. Tell the IP address to a control engineer
User's Manual EM11A015B
intelligent Touch Manager
3. IP address appears
228