Daikin DCM601A51 User Manual page 300

<About Power Proportional Distribution function>
■
"PPD" icon is not displayed.
The Power Proportional Distribution function is not enabled. Consult your authorized dealer.
■
About standby power
"Standby power" in the Power Proportional Distribution result displays the total of the crank case
heater power consumed by an air conditioner in a standby state, because it cannot be distributed
to any other air conditioner when it is set up not to distribute the power.
This total power needs to be separately handled as common utility expenses etc.
■
To display the power consumption by tenant
The iTM unit displays the power consumption by air conditioner or by area in the Power
Proportional Distribution result.
■
To convert the power consumption into power charges
The iTM unit does not support the conversion of the power consumption into power charges.
■
To print the Power Proportional Distribution result
The iTM unit does not have the print function.
299 User's Manual EM11A015B
intelligent Touch Manager