Daikin DCM601A51 User Manual page 320

3. Area Setup CSV file format
The format of the CSV file used for saving and loading is as follows.
File version
@S:AREA-INFO
S
A, [Area ID], [Area name], [Detailed information], [Starting Interval.], [Stopping Interval.], [Icon ID]
Area
, A, [Area ID], [Area name], [Detailed information], [Starting Interval.], [Stopping Interval.], [Icon ID]
information
, , P, [Management point ID]
block
, P, [Management point ID]
...
@E:AREA-INFO
@S:PNT-INFO
Management
[Management point ID], [Management point name], [Management point's detailed information], [Management point type], [Icon ID]
point
information
...
block
@E:PNT-INFO
Area information block
• The area information block is the section that starts with the @S: AREA-INFO line and ends with
the @E: AREA-INFO line.
• All areas are described with the identifier "S".
• The line following the line that starts with "S" does not start with any separator (a comma in the
above example). This line must contain the identifier "A" or "P".
• Information on one area or one management point is described in a single line.
• The area information identifier is described as the single-byte character "A", while the
management point information identifier is described as a single-byte character "P".
• The number of separators prefixed to "A" or "P" indicates the hierarchical level of the parent area.
• No separator is prefixed to "A" or "P" of the management point information that belongs to the
area immediately below the top area.
• One separator is prefixed to "A" or "P" of the area or management point information that belongs
to the area in the hierarchical level 1.
• Two separators are prefixed to "A" or "P" of the area or management point information that belongs
to the area in the hierarchical level 2.
(A maximum of 9 separators can be prefixed to "A" while a maximum of 10 separators can be prefixed to "P".)
• The first line of the area information block must contain area/management point information
located in the hierarchical level 1.
(This line always starts with "A", "P", or "S".)
Management point information block
• Because the management point information block is displayed as reference information (treated
as a comment), changing data in this block and then loading the CSV file does not affect the
management point information.
319 User's Manual EM11A015B
intelligent Touch Manager