Collecting Data And Outputting The Power Proportional Distribution Results - Daikin DCM601A51 User Manual

The range of dates you can enter is between the 1st of the same month of the previous year and
the previous day of the day you opened the dialog. The order of the start date and end date must
not be inverted.
Select the Month radio button
as the 1-month period starting from the Account Day of the previous month.
For example, if the date on the iTM unit is October 20 and the Account Day is set to the 20, then
the proportional distribution result for the period from September 20 to October 19 will be stored.
Touch the Modify button and enter the Account Date. You can enter a value in the 1 to 31 range.
However, if the specified counting date does not exist in the month, the counting period will be
automatically adjusted to match the calendar dates.
Excluded Time + Exceptions button

Collecting data and outputting the Power Proportional Distribution results

(3)
Touching the Execute button
unit and touch the Yes button to start data collection and store the result in a folder created on the
USB memory.
Data collection may take up to 30 minutes. When data collection finishes, the iTM displays the data
collection period and the list of data collection results in (4), then saves the result data in a file
named "PPD_collection start date_collection end date.csv".
If you start data collection without connecting the USB memory, the iTM displays the data collection
results, but does not store any data file. Touch the Close button to close the screen.
(b)
to set the Account Day. The data collection period is determined
(2)
is the button for advanced settings.
(4)
(3)
displays a confirmation dialog. Connect a USB memory to the iTM
User's Manual EM11A015B
intelligent Touch Manager
230