11-6
Data output function
Besides the Energy Navigator function, the iTM also has an ability to save measured data to a USB
memory for sophisticated analysis.
Data regarding management points and areas with occurrences of failure to turn off and setpoint
gap can be output from the Equipment operation management screen.
For the PC/USB memory requirements to use this function, see "Peripheral Equipment
Specifications (CB14A005)".
The following describes the steps to output the energy budget/actual management data as well as
data of a specific management point.
Display the Energy Navigator tab on the Menu List screen (see "4-5 Menu List Screen: Energy
Navigator Tab").
(1)
Touch the Data output button
(1)
and display the Data output screen. The Data output screen
consists of two tabs: Energy Data and Mgmt. Point Data.
User's Manual EM11A015B
272
intelligent Touch Manager