Daikin DCM601A51 User Manual page 280

• Icon View in Each Status
Maintenance
When all
Icon
management points
connected to the
iTM are in
maintenance
Communication
Error
Icon
When there is at
least one
management point
connected to the
iTM with
communication error
*1 The icon color is displayed in the color set up in the System Settings.
*2 An error of the proportional distribution system is judged as restored when the balloon has
disappeared.
NOTE
• When the statuses of management points connected to the iTM vary, that with the highest
priority is displayed with an icon. The order of priority is as follows:
"Maintenance" < "Stop/No operation" < "Setback Inactive" < "Setback Active" < "Operating"
< "Communication Error" < "Unit/Limit Error" < "System error" < "Emergency Stop"
< "Network Error"
279
Stop/No operation Setback Inactive
• When all
management
points connected
When there is at
to the iTM are
least one
Stop/No operation
management point
• When no
with inactive setback
management
point is connected
to the controller
Unit/Limit Error System Error
When there is at
least one
management point
connected to the When there is a
iTM with error system error in iTM
(Error sign is *2
displayed over the
Operating, Stop/No
operation)
User's Manual EM11A015B
intelligent Touch Manager
Setback Active
When there is at
When there is at least one
least one management point
management point connected to the
with active setback iTM that is operating
*1
Emergency Stop Network Error
• When there is
communication
error between the
When there is at
iTM integrator and
least one
iTM
management point
• When two iTM
connected to the
integrators are
iTM in emergency
connected to a
stop
single iTM
• When the version
is not compatible
Start (*1)