Daikin DCM601A51 User Manual page 185

• Interlock Program Output Setup Screen
This screen is displayed when you touch the Modify button on the Interlock Program Setup
screen.
Sets events that will be output by the interlocking program.
(2)
(1) Events list
Displays a list of management points/areas to which events are output.
(2) Order button
Moves up and down the output event selected in the Events list.
(3) Action Setup button
Displays the Action Setup screen that allows you to set up the action to be performed by the
output event selected in the Events list.
(4) Available Management Points/Area list
Displays a list of management points/areas to which events can be output.
(5) Add button
Registers an available management point or area selected in the Available Management Points/
Area list to the Events list as a target of event output.
You can register up to 25 management points or 1 area as target of an event output.
You cannot simultaneously register management points and areas in one interlocking program.
(6) Remove button
Removes the management point or area selected in the Events list.
(7) OK button
Saves the edit and closes the screen.
(8) Cancel button
Cancels the edit and closes the screen.
(5)
(1)
(6)
(3)
User's Manual EM11A015B
intelligent Touch Manager
(4)
(7) (8)
184