Table of Contents
Advertisement
Roof
96
To open: press button ;.
X
To close: press button ;.
X
If the boot is loaded correctly, boot separa-
tor : is automatically closed to the full
extent.
When the boot lid is opened, boot separator :
opens automatically.
Removing and fitting
To remove: close boot separator :
X
(
page 95).
Y
To disconnect the electric plug connector,
X
press the release catch on connector ; and
remove connector ;.
Unhook net = from holders ? on both sides
X
and guide it to the rear until it is completely
rolled up.
Turn catch lever A downwards in the direc-
X
tion of the arrow on both sides.
Boot separator : is unlocked.
Slide boot separator cover : forwards.
X
Pull boot separator : out of the two guides in
X
the direction of arrow B.
To fit: insert boot separator : into the two
X
guides in the direction of arrow C to the stop.
Turn catch lever A upwards in the direction
X
of the arrow on both sides.
Boot separator : is locked.
Pull the net forwards and hook into the retain-
X
ers on both sides.
Push boot separator cover : back against
X
the spring pressure and insert to the end stop
on both sides.
Advertisement
Table of Contents
