Table of Contents
Advertisement
Seats
104
Adjust the driver's seat, head restraint, steer-
ing wheel and mirrors and fasten your seat
belt before starting the engine.
To adjust the head restraint height: slide
X
the switch for the head restraint adjust-
ment : up or down in the direction of the
arrow.
Sliding the seats forward/back
G
WARNING
When adjusting a seat, you or another vehicle
occupant could become trapped by the guide
rail of the seat, for instance. There is a risk of
injury.
Make sure that no one has any part of their
body within the sweep of the seat when
adjusting it.
!
Make sure that there are no containers in
the cup holder and no objects in the footwell
or behind the seats when adjusting the seats.
Otherwise, you could damage the seats and
the objects.
You can move the seat forwards, in order to gain
better access to the rear compartment, e.g. to
reach the stowage compartment in the rear .
Remove the seat belt from the seat belt guide
X
(
page 103).
Y
To move the seat forwards: press : on
X
switch :.
The seat moves automatically to the foremost
position.
To move the seat backwards: press 9
X
on switch :.
The seat moves back to the previous position.
To stop seat movement: press : or
X
9 in the opposite direction.
Adjusting the multicontour seat
You can adjust the multicontour seat using
COMAND Online .
Adjusting the active multicontour
seat
You can adjust the active multicontour seat
using COMAND Online .
Adjusting the 4-way lumbar support
You can adjust the 4-way lumbar support using
COMAND Online .
Switching the seat heating on/off
Switching on/off
G
WARNING
If you repeatedly switch on seat heating, the
seat cushion and backrest padding may
become very hot. The health of vehicle occu-
pants with limited temperature sensitivity or a
limited ability to react to excessively high
temperatures may be affected or they may
even suffer burn-like injuries. There is a risk of
injury.
Therefore, do not switch on the seat heating
repeatedly.
Advertisement
Table of Contents
